Home > IWB Holsters
Sort By:
Page of 1
Custom Patterns Hook Holster Inside the Waistband Holster IWB with Sweatguard & FOMI clip
Custom Patterns
Our Price: $10.00
Hook Holster
Our Price: $32.00
Deal of the Day Price: $25.00
Savings: $7.00

(6)
Inside the Waistband Holster IWB with Sweatguard & FOMI clip
Our Price: $45.00
Deal of the Day Price: $40.50
Savings: $4.50

(20)
Custom Infused Patterns

Please read the details below prior to purchasing and message me for any questions:
- This is an addition to your holster order and not sold as a single item. Please select black on the holster option as there is no extra cost.
-All custom designs will be centered on your OWB holster. On your IWB holster the design will also be centered...meaning it will "wrap" around on both sides.
-Most designs are printed on Light Grey, Desert Tan, or White Kydex .080 The kydex color will be dependent on artwork submitted.
-Logo cannot be copyrighted or trademarked
-All prints are non-refundable and non-exchangeable
-Lead time: 2 weeks (Lead time is approximate, and will begin once the artwork has been approved)

-Please email all designs to gunnerscustomholsters@yahoo.com

Hook Holsters

Holster Specifics:

- My patented design prevents debris from entering the barrel and protects the front sight.

- Ambidextrous as the attached polymer clip can be removed and reversed for a left or right hand carry.

- Polymer clip will come as 1.5" but 1.75" is available

- The Polymer clip is attached with 2 screw sets and 2 rubber grommets and you can adjust the angle/cant for a 15 deg carry
or you can remove one screw set for an increased angle.

- Conceals easily due to the minimal design which keeps the profile and printing minimal

- Tuckable...meaning you can wear this holster and carry even with your shirt tucked in.

- You can also remove the attached clip and attach a lanyard if needed.
Offered only by Gunner's
Patented

Unlike leather and nylon holsters kydex maintains its shape allowing the shooter to holster smoothly every time. Every holster is tested with numerous draws and with a "jump test" to ensure solid retention while still allowing a smooth draw and presentation. Not all pistols are the same so that applies to holsters as well.


My custom holsters hold the pistol very securely by the geometry of design, trigger guard retention and adjustable retention screw sets.


  • I ensure the retention is where it is needed and I also reduce the retention around the ejection port to help reduce wear on the pistol.

  • I will shape the material around the magazine release in order to make administrative or tactical reloads while holstered.

  • A sight passage will be made in order to ensure the sights do not touch material ensuring accuracy and less wear.

  • Your holster will have a sweat-guard which prevents the pistol from touching the body and the body from touching the pistol. Helps for prevent pinching as it guides your pistol into the holster.

  • This solid fit will allow for good sharp draws and easily allow the handgun to be holstered.

  • Any cant/angle is available making it custom to your draw and EDC needs.

  • There is little to no break-in with all my holsters unlike leather.


I believe my combination of features and low price are unmatched as I take the time to ensure every holster is custom made to the shooter and I understand that failure is not an option!


I stand by my product and offer a lifetime warranty if you ever have an issue get it back to me and I will make it right.


Common Terms/Definitions in regards to Pistol Holsters:


Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.


Outside the Waistband (OWB) holsters ride as close to the body as possible ensuring a flat profile while still providing quick and rapid draws.


Sweat Guard protects the body from the firearm and the firearm from perspiration. It also helps ensure rapid presentation and holstering.

SOB- Small of the Back carry

EDC- Everyday Carry

Thank you for taking the time to review my holsters. Your support is greatly appreciated as I look forward to supporting your 2nd Amendment right to carry and bear arms. After serving the United States Marine Corps for 23 years as an Infantryman building holsters and teaching firearms training is my way to continue my support of OUR awesome country! I am a shooter making holsters for shooters this is not a weekend job for me...I do it every day!


Semper Fidelis

Joe

Gunner's Custom Holsters

&

Firearms Training LLC

Columbus, NC


Please Note:

My custom holsters are made from Kydex/Holstex...They are not made from carbon fiber material. The carbon fiber pattern can be selected under my color options. If you select a regular color example: black then you will receive a non-carbon fiber pattern holster in regular black. Not all my listings have the carbon fiber patterns as a color option but most of my holster listings do.

Kydex/Holstex is a durable, strong and easily cleaned thermoplastic. Kydex is also very light weight and has excellent definition making it great for using in my custom light weight holsters.

When you clean your pistol please use the same oil on the holster inside and out. I prefer to use Hoppes no9 lubricating oil as this maintenance will prolong the life of your holster and also help prevent holster wear.

Inside the Waistband (IWB) holsters ride the inside of the waistband. This allows the pistol to be concealed under light covering garments.
This Holster will have a FOMI clip to hold the holster in place ensuring a smooth draw and carry.
The Clip is also adjustable for a high or low ride and you can adjust the angle as well.
Retention screws can be adjusted to your personal needs as each screw set has a grommet that allows for the adjustment in retention.

Unlike leather and nylon holsters kydex maintains its shape allowing the shooter to holster smoothly every time. Every holster is tested with numerous draws and with a "jump test" to ensure solid retention while still allowing a smooth draw and presentation. Not all pistols are the same so that applies to holsters as well.


My custom holsters hold the pistol very securely by the geometry of design, trigger guard retention and adjustable retention screw sets.


  • I ensure the retention is where it is needed and I also reduce the retention around the ejection port to help reduce wear on the pistol.

  • I will shape the material around the magazine release in order to make administrative or tactical reloads while holstered.

  • A sight passage will be made in order to ensure the sights do not touch material ensuring accuracy and less wear.

  • Your holster will have a sweat-guard which prevents the pistol from touching the body and the body from touching the pistol. Helps for prevent pinching as it guides your pistol into the holster.

  • This solid fit will allow for good sharp draws and easily allow the handgun to be holstered.

  • Any cant/angle is available making it custom to your draw and EDC needs.

  • There is little to no break-in with all my holsters unlike leather.


I believe my combination of features and low price are unmatched as I take the time to ensure every holster is custom made to the shooter and I understand that failure is not an option!


I stand by my product and offer a lifetime warranty if you ever have an issue get it back to me and I will make it right.


Common Terms/Definitions in regards to Pistol Holsters:


Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.


Outside the Waistband (OWB) holsters ride as close to the body as possible ensuring a flat profile while still providing quick and rapid draws.


Sweat Guard protects the body from the firearm and the firearm from perspiration. It also helps ensure rapid presentation and holstering.

SOB- Small of the Back carry

EDC- Everyday Carry

Thank you for taking the time to review my holsters. Your support is greatly appreciated as I look forward to supporting your 2nd Amendment right to carry and bear arms. After serving the United States Marine Corps for 23 years as an Infantryman building holsters and teaching firearms training is my way to continue my support of OUR awesome country! I am a shooter making holsters for shooters this is not a weekend job for me...I do it every day!


Semper Fidelis

Joe

Gunner's Custom Holsters

&

Firearms Training LLC

Columbus, NC


Please Note:

My custom holsters are made from Kydex/Holstex...They are not made from carbon fiber material. The carbon fiber pattern can be selected under my color options. If you select a regular color example: black then you will receive a non-carbon fiber pattern holster in regular black. Not all my listings have the carbon fiber patterns as a color option but most of my holster listings do.

Kydex/Holstex is a durable, strong and easily cleaned thermoplastic. Kydex is also very light weight and has excellent definition making it great for using in my custom light weight holsters.

When you clean your pistol please use the same oil on the holster inside and out. I prefer to use Hoppes no9 lubricating oil as this maintenance will prolong the life of your holster and also help prevent holster wear.


Taser Pulse Holster Hybrid Holster Mace Pepper Gun 2.0  Holster
Taser Pulse Holster
Our Price: $45.00
Deal of the Day Price: $38.50
Savings: $6.50

(5)
Hybrid Holster
Our Price: $45.00
Your Taser Pulse Holster will have a sweat-guard on both sides; this will help prevent the safety from being engaged and draining the battery.
Your holster will also have 2 adjustable screw-sets for the retention.
Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.
My Hybrid holster will have a black leather panel for the inside and a kydex shell on the outside. You can select the attached clip style that works best for you.
Mace Pepper Gun 2.0
You can select from an IWB or OWB carry both types of holsters will have a sweatguard.
Your holster will also have 2 adjustable screw-sets for the retention.

Unlike leather and nylon holsters kydex maintains its shape allowing the shooter to holster smoothly every time. Every holster is tested with numerous draws and with a "jump test" to ensure solid retention while still allowing a smooth draw and presentation. Not all pistols are the same so that applies to holsters as well.


My custom holsters hold the pistol very securely by the geometry of design, trigger guard retention and adjustable retention screw sets.


  • I ensure the retention is where it is needed and I also reduce the retention around the ejection port to help reduce wear on the pistol.

  • I will shape the material around the magazine release in order to make administrative or tactical reloads while holstered.

  • A sight passage will be made in order to ensure the sights do not touch material ensuring accuracy and less wear.

  • Your holster will have a sweat-guard which prevents the pistol from touching the body and the body from touching the pistol. Helps for prevent pinching as it guides your pistol into the holster.

  • This solid fit will allow for good sharp draws and easily allow the handgun to be holstered.

  • Any cant/angle is available making it custom to your draw and EDC needs.

  • There is little to no break-in with all my holsters unlike leather.


I believe my combination of features and low price are unmatched as I take the time to ensure every holster is custom made to the shooter and I understand that failure is not an option!


I stand by my product and offer a lifetime warranty if you ever have an issue get it back to me and I will make it right.


Common Terms/Definitions in regards to Pistol Holsters:


Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.


Outside the Waistband (OWB) holsters ride as close to the body as possible ensuring a flat profile while still providing quick and rapid draws.


Sweat Guard protects the body from the firearm and the firearm from perspiration. It also helps ensure rapid presentation and holstering.

SOB- Small of the Back carry

EDC- Everyday Carry

Thank you for taking the time to review my holsters. Your support is greatly appreciated as I look forward to supporting your 2nd Amendment right to carry and bear arms. After serving the United States Marine Corps for 23 years as an Infantryman building holsters and teaching firearms training is my way to continue my support of OUR awesome country! I am a shooter making holsters for shooters this is not a weekend job for me...I do it every day!


Semper Fidelis

Joe

Gunner's Custom Holsters

&

Firearms Training LLC

Columbus, NC


Please Note:

My custom holsters are made from Kydex/Holstex...They are not made from carbon fiber material. The carbon fiber pattern can be selected under my color options. If you select a regular color example: black then you will receive a non-carbon fiber pattern holster in regular black. Not all my listings have the carbon fiber patterns as a color option but most of my holster listings do.

Kydex/Holstex is a durable, strong and easily cleaned thermoplastic. Kydex is also very light weight and has excellent definition making it great for using in my custom light weight holsters.

When you clean your pistol please use the same oil on the holster inside and out. I prefer to use Hoppes no9 lubricating oil as this maintenance will prolong the life of your holster and also help prevent holster wear.

Inside the Waistband Holster IWB with Sweatguard & attached tuckable clip Inside the Waistband TLR 6 IWB Sweatguard
Inside the Waistband Holster IWB with Sweatguard & attached tuckable clip
Our Price: $45.00
Deal of the Day Price: $40.50
Savings: $4.50

(15)
Inside the Waistband TLR 6 IWB Sweatguard
Our Price: $50.00
Deal of the Day Price: $45.00
Savings: $5.00

(3)
Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.
You can select a tuckable polymer or steel clip to hold the holster in place ensuring a smooth draw and carry.
The attached clip also allows the angle/cant to be adjustable and allows you to tuck a shirt in.

Unlike leather and nylon holsters kydex maintains its shape allowing the shooter to holster smoothly every time. Every holster is tested with numerous draws and with a "jump test" to ensure solid retention while still allowing a smooth draw and presentation. Not all pistols are the same so that applies to holsters as well.


My custom holsters hold the pistol very securely by the geometry of design, trigger guard retention and adjustable retention screw sets.


  • I ensure the retention is where it is needed and I also reduce the retention around the ejection port to help reduce wear on the pistol.

  • I will shape the material around the magazine release in order to make administrative or tactical reloads while holstered.

  • A sight passage will be made in order to ensure the sights do not touch material ensuring accuracy and less wear.

  • Your holster will have a sweat-guard which prevents the pistol from touching the body and the body from touching the pistol. Helps for prevent pinching as it guides your pistol into the holster.

  • This solid fit will allow for good sharp draws and easily allow the handgun to be holstered.

  • Any cant/angle is available making it custom to your draw and EDC needs.

  • There is little to no break-in with all my holsters unlike leather.


I believe my combination of features and low price are unmatched as I take the time to ensure every holster is custom made to the shooter and I understand that failure is not an option!


I stand by my product and offer a lifetime warranty if you ever have an issue get it back to me and I will make it right.


Common Terms/Definitions in regards to Pistol Holsters:


Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.


Outside the Waistband (OWB) holsters ride as close to the body as possible ensuring a flat profile while still providing quick and rapid draws.


Sweat Guard protects the body from the firearm and the firearm from perspiration. It also helps ensure rapid presentation and holstering.

SOB- Small of the Back carry

EDC- Everyday Carry

Thank you for taking the time to review my holsters. Your support is greatly appreciated as I look forward to supporting your 2nd Amendment right to carry and bear arms. After serving the United States Marine Corps for 23 years as an Infantryman building holsters and teaching firearms training is my way to continue my support of OUR awesome country! I am a shooter making holsters for shooters this is not a weekend job for me...I do it every day!


Semper Fidelis

Joe

Gunner's Custom Holsters

&

Firearms Training LLC

Columbus, NC


Please Note:

My custom holsters are made from Kydex/Holstex...They are not made from carbon fiber material. The carbon fiber pattern can be selected under my color options. If you select a regular color example: black then you will receive a non-carbon fiber pattern holster in regular black. Not all my listings have the carbon fiber patterns as a color option but most of my holster listings do.

Kydex/Holstex is a durable, strong and easily cleaned thermoplastic. Kydex is also very light weight and has excellent definition making it great for using in my custom light weight holsters.

When you clean your pistol please use the same oil on the holster inside and out. I prefer to use Hoppes no9 lubricating oil as this maintenance will prolong the life of your holster and also help prevent holster wear.

Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.
I utilize an steel attached clip to hold the holster in place ensuring a smooth draw and carry.
The attached Steel clip allows the angle/cant to be adjustable and allows you to tuck a shirt in.
The attached Polymer clip allows the angle/cant to be adjustable and allows you to tuck a shirt in and is available in 1.5", 1.75" and 2"
The FOMI clip slide over the top of your belt and secures under the belt with a reverse tab and are available in 1.5" and 1.75"

Unlike leather and nylon holsters kydex maintains its shape allowing the shooter to holster smoothly every time. Every holster is tested with numerous draws and with a "jump test" to ensure solid retention while still allowing a smooth draw and presentation. Not all pistols are the same so that applies to holsters as well.


My custom holsters hold the pistol very securely by the geometry of design, trigger guard retention and adjustable retention screw sets.


  • I ensure the retention is where it is needed and I also reduce the retention around the ejection port to help reduce wear on the pistol.

  • I will shape the material around the magazine release in order to make administrative or tactical reloads while holstered.

  • A sight passage will be made in order to ensure the sights do not touch material ensuring accuracy and less wear.

  • Your holster will have a sweat-guard which prevents the pistol from touching the body and the body from touching the pistol. Helps for prevent pinching as it guides your pistol into the holster.

  • This solid fit will allow for good sharp draws and easily allow the handgun to be holstered.

  • Any cant/angle is available making it custom to your draw and EDC needs.

  • There is little to no break-in with all my holsters unlike leather.


I believe my combination of features and low price are unmatched as I take the time to ensure every holster is custom made to the shooter and I understand that failure is not an option!


I stand by my product and offer a lifetime warranty if you ever have an issue get it back to me and I will make it right.


Common Terms/Definitions in regards to Pistol Holsters:


Inside the Waistband (IWB) holsters ride the inside of the waistband using a belt. This allows the pistol to be concealed under light covering garments.


Outside the Waistband (OWB) holsters ride as close to the body as possible ensuring a flat profile while still providing quick and rapid draws.


Sweat Guard protects the body from the firearm and the firearm from perspiration. It also helps ensure rapid presentation and holstering.

SOB- Small of the Back carry

EDC- Everyday Carry

Thank you for taking the time to review my holsters. Your support is greatly appreciated as I look forward to supporting your 2nd Amendment right to carry and bear arms. After serving the United States Marine Corps for 23 years as an Infantryman building holsters and teaching firearms training is my way to continue my support of OUR awesome country! I am a shooter making holsters for shooters this is not a weekend job for me...I do it every day!


Semper Fidelis

Joe

Gunner's Custom Holsters

&

Firearms Training LLC

Columbus, NC


Please Note:

My custom holsters are made from Kydex/Holstex...They are not made from carbon fiber material. The carbon fiber pattern can be selected under my color options. If you select a regular color example: black then you will receive a non-carbon fiber pattern holster in regular black. Not all my listings have the carbon fiber patterns as a color option but most of my holster listings do.

Kydex/Holstex is a durable, strong and easily cleaned thermoplastic. Kydex is also very light weight and has excellent definition making it great for using in my custom light weight holsters.

When you clean your pistol please use the same oil on the holster inside and out. I prefer to use Hoppes no9 lubricating oil as this maintenance will prolong the life of your holster and also help prevent holster wear.